ProGrout Epoxy

Before grouting joints, check that tiles have been laid correctly and are anchored perfectly to the substrate. Substrates must be perfectly dry. Grout joints in accordance with the recommended waiting time indicated on the relative data sheet for the adhesive used. For mortar substrates, wait at least7 – 14 days depending on screed thickness, ambient weather conditions and on the level of absorption of the covering and the substrate. Any water or moisture rising can cause vapour pressure to accumulate, which may in turn loosen the tiles on account of the complete non-absorbency of the grout or of the tiles themselves. Joints must be free from any excess adhesive, even if already hardened. Furthermore, they must be of an even depth fort he whole width of the tile covering, thereby ensuring maximum chemical resistance. Any dust and loose debris must be removed from joints by carefully cleaning them with vacuum cleaner. The surface of the coating material to be grouted must be dry and free from dust or building dirt; any residual protective coatings must first be removed using specific products. Before grouting joints, check the cleanability of the tile covering, as porous or highly micro-porous surfaces may make cleaning difficult. It is advisable to perform a preliminary test on tiles not to be laid or in a small, concealed area.

• Waterproof
• Stain Resistant
• Hygienic
• Easy Clean
• Suitable for joint widths of 2-12mm
• Pot life: 30-40 minutes
• Light foot traffic: 24 hours

• Unit Size: 3kg
• Colours: White, Jasmine, Silver Grey, Grey and Charcoal
• Classification: EN13888 CG2 RG
• Application Thickness: 2 – 12mm
• Pot Life: 30 – 40 minutes
• Light Foot Traffic: 24 hours
• Hard Set Time: 3 days
• Application Temperatures: 5°C to 30°C *Depending on temperatures, substrate and site conditions.

Please ensure that appropriate PPE is used when preparing, mixing and applying products. Always wash hands before consuming food and make sure that materials are kept safely out of reach of children and animals. Please dispose of packaging and waste appropriately. A full Safety Data Sheet relating to this product is available from ultratileadhesives.co.uk.

All products are manufactured in a plant whose quality management system is certified / registered as being in conformity with BS EN ISO 9001, ISO14001 and ISO 45001. UltraTile products are guaranteed against defective materials and manufacture and will be replaced, or money refunded if the goods do not comply with our promotional literature. We cannot however accept responsibility arising from the application or use of our products because we have no direct or continuous control over where and how our products are used. All UltraTile products are sold subject to our terms and conditions of sales, copies of which may be obtained upon request.