ProClean Tile & Grout Sealer

ProClean Tile and Grout Sealer is an incredibly versatile sealer that can be used on a range of surfaces and substrates, from being applied as a grout protector to a standard tile sealer.

Our tile sealer can be used on the following surfaces:

• Sandstone
• Limestone
• Slate
• Travertine
• Terracotta
• Quarry tile
• Granite
• Marble
• Porcelain
• Porous
• Tiles & grout.

Before applying any grout sealer or tile sealer, always perform a test in an inconspicuous area on-site to check suitability of the product before use – read these instructions fully before application. 2. 3. If you experience difficulties using this product, please contact our technical support team on +44 (0)1827 254402.

Use our tile grout sealer without thinning down. Surfaces should be clean, dry and free from oil, grease, dust and any other debris. Do not apply in temperatures below 5°C or above 25°C and do not subject ProClean to extreme temperatures until completely dry.

Apply a generous, even coat of ProClean Tile and Grout Sealer to the surface and edges of the stone using a roller, sponge, lint-free cloth or brush. Ensure even distribution by wiping over several times. Remove any surface sealer that has not penetrated the tile or stone after 15-20 minutes.

Apply a second coat of tile grout sealer, allowing a minimum of 30-45 minutes drying between coats. Repeat the process and remove any excess sealer from the applied area with a dry, lint-free cloth.

It will take up to 24 hours before your grout sealer will offer full protection. Until this has happened, keep the surface free from water and oil spills, as stains may occur before fully cured.